|
|
--- |
|
Industrial Wireless Radio Controls

|
Applications:
Industrial Monitoring, Pump control,
Lighting, Tank Level Controller or Monitor, Remote Start/Stop,
Monitor remote instruments, Factory process, Generators,
Solar installations, Sensors and
detectors,
Packing and mobile system, SCADA installations,
Lighting, Alarms, Wire replacement.
Wireless
Range from: 3 Km (2 Miles ) |
REQUEST A QUOTATION
|
PERFORMANCE
2 Mile ( 3 km ) line of sight
w High-Gain yagi antenna
Optional Extended range up to 10 Miles ( 16Km )
Encoded 16 bits with 4,092 codes
Standard Single, Two or Four Independent Channel
Weatherproof Fiber enclosure
Easy installation, No programming required
Panel mount or wall mount
Installation features
■ Operates in the license-free 433 MHz ISM band
■ Easy installation, No internet,
No programming
required
|
SPECIFICATIONS
Transmitter
Input: Dry Contact
Receiver Output
SPDT
relay 6 Amp @ 240VAC, 32 VDC, Class 2
Operation frequency:
433 MHz digital encoded, industrial band Operating Temperature: -4° to +140° F (-20° to +60° C)
Dimensions 12.0 x
8.0 x 4.0
in. /
300 x
200 x 100 mm
Operation voltage: 12VDC or 120/220VAC Power: per FCC Part 15.249, 50mV/m @ 3m
Power draw:
Standby 50mA, energized 400mA
•
Compliance:
433 MHz
license free industrial band part 95
FCC,
CFR part 15.247 ISM, PC board UL796
and UL94
|
Single Channel pump control
wiring example
 |
Two Channel pump control Start
- Stop wiring example
 |
Part # Channel Configuration |
|
|
943301 Single (1)
943302 Two (2)
943304 Four (4)
REQUEST A QUOTATION
|
|
Basic
Package include:
■ One Base Transmitter, ■ One Base Receiver
■ Two Yagi 938432 Antennas with 12ft coaxial cable,
■ in Weatherproof Fiber enclosures & Instructions |
ANTENNA
 |
938432
3 Element Beam Yagi Antenna
433 MHz, Gain: 7 dBi
Rating: 150 Watts
Impedance 50 ohms N terminal
Vertical beam 45 degrees -
Horizontal beam 60 degrees
Base Length: 18", Weight: 1.0lb
Yagi Antenna w 12ft Coax Cable & RF Connector
|
|
DISCLAIMER:
Contact a licensed professional for your
project. -
Warning:
Radio control equipment is not to be used in life safety |
|
|
|