Transmitter and
Receiver for 2 Miles of Line-of-Sight range
Up to 10 Miles with optional
Long Range Antenna
Application:
OPERATION:
Pre programmer panel for a three float circuit application,
On contact closure (Low) sends a pulse to
start the pump process,
on contact closure (Stop) sends a pulse to
stop the pump process,
with (Overflow ) second stop signal
is transmitted to end the pump process
Wiring
diagram example
|
 |
Special order include:
1 Transmitter set 937144
1 Receiver set 937044
2 Antennas,
8"
2 NEMA 4X non metallic enclosure
2 Power adapters 12VDC
1 Wiring Diagram |
SPECIFICATIONS
|
Operating Voltage: |
12 to 15. VDC |
|
Operating Temperature: |
-4° to +140° F (-20° to +60° C) |
|
Receiver Type: |
Digital Superheterodyne -118 dB |
|
Frequency |
27,255 MHz |
|
Codes: |
65,536
DIP switch programming |
|
Current Drain |
Receiver 25 mA, standby, 195 mA operation
Transmitter 1 mA standby, 2 Amp 7 sec. |
|
Data
process |
Encoded Loop response 500 ms. |
|
Relay
Output |
10 Amp max
30VDC - 250VAC
N/0 and N/C |
|
Antenna |
50 Ohms
Quarter Wave,
Antenna optional |
|
Dimensions: |
10 in L x 8 in W x 4 in H
(254 x
200 x 100 mm) |
|
Weight |
6
lb. (3 Kg) each |
|
Enclosure |
NEMA 4X non
metallic waterproof |
|
